We change the coordinate using calibrated plates.
![]()
To change the coordinates along the plane, plates with a caliber of 0.5 mm are used. and 1.0mm . The plate is mounted on neodymium magnets between the end face of the processed plate and the conductor. The offset occurs at the appropriate indent.- To change the coordinates of drilling to the end, plates with a caliber of 0.5 mm are used. , 1.0mm ., 2.0mm. .8.0mm _ _ The plates are installed between the upper platform and the middle guide of the jig.
To change the coordinates along the plane, plates with a caliber of 0.5 mm are used. and 1.0mm . The plate is mounted on neodymium magnets between the end face of the processed plate and the conductor. The offset occurs at the appropriate indent.
Comments powered by CComment